How to Bend Forward Without Stressing the Spine

When you go to a yoga class and attempt to do a forward bend, you are likely to hear: “Bend from the hips!” What does it mean exactly? And is it really the best way to get there?

Our main intention when it comes to forward bends is to stretch the lower back. Unfortunately, the way we GO INTO the forward bend and COME OUT of it can mess up our plans. Here is why.

Going in

When we go into the forward bend, we basically have three options: “swan dive,” neutral spine, and “nose dive.” All of these refer to the positioning of our lower backs.

The request to “bend from the hips” usually refers to the “swan dive” option. It means that instead of bending from the waist (like you do in a “nose dive”), you choose to lead the movement with your pelvis, tipping it forward first and then following it with the rest of the upper body. The problem is that if your lower back has a tendency to overarch, it will do it here, creating a deep curve that is not supported. As a result you are risking posterior disk compression (over-squeezing your lumbar disks at the back) and creating lower back tension, both because of the excessive lumbar arch. This is more common in extra bendy yoga practitioners, and those who have a lot of mobility in the movement of their pelvis.

If instead you take a “nose dive,” bending from the waist and curling your upper body down first before your pelvis, you end up reversing your natural lumbar curve and putting extra load on the front portion of your lumbar disks and the lower back muscles. This way you are risking anterior disk compression (over-squeezing your lumbar disks at the front) and straining your lower back muscles from pulling on them too hard. This movement pattern is especially common in new inexperienced students.

The secret here lies in controlling the relationship between your pelvis and your lumbar spine. We do not want the pelvis to lead the way OR get left behind. Instead, we begin to bend forward with the pelvis and the upper body moving together as a unit. To make that happen, we need to keep the knees soft (4), so that the hamstrings do not get in the way, and progressively contract the abdomen (1), so that we create support for the lower back and control the position of the pelvis. When you do it this way, you end up gradually stretching your lower back from the beginning of the movement to the very end. The chest remains raised at first (2), and then begins to fold down at about half-way. The head remains in line with the spine during the entire movement (3). When you do it this way, the abdominal contraction supports your spine and your lower back like an invisible hand.

Coming out

On the way out of the pose we basically do the same thing in reverse. We lead with the chest first returning into the neutral spine at about halfway up, and then move the upper body and pelvis together to return into standing. If you decide to roll up instead, you will be risking anterior disk compression once again, but this time with an added pressure of moving against gravity.

Moving in and out of the forward bend before holding the pose is a super useful way to warm up the lower back by engaging it (on the way up) and stretching it (on way down). That way we are using our usual contract-relax-stretch principle to increase the blood flow to the area and then make it more pliable and compliant. After that your lower back will be much more willing to hold the pose, and you will get the most out of the stretch.

Few words about hamstrings

Keeping your legs straight in most forward bends is not advisable, because of the risk of lower back strain, hamstring pull and shear stress on the sacrum.

”Working the pose”

Once we get ourselves into the forward bend, we can do some subtle work to get the most out of it.

On the Inhale lift out of the pose slightly and lengthen the spine; on the exhale gradually contract your abdomen and move deeper into the pose, maintaining this newly found length.

Potential release valves

In addition to the “swan dive,” “nose dive,” and straight legs, we might encounter few other issues while attempting forward bends that might strain the student’s body. Here are few examples:

Release valves in forward bends

1. Collapsing the chest over the belly. Here once again we are risking anterior disk compression. In addition, this kind of positioning limits our ability to lengthen the spine and get a good stretch along the back of the body.

Solution: Bend your knees as much as you need to be able to lengthen the torso along the thighs.

2. Jutting the chin up, which increases the arch of the cervical spine and stresses the neck. It also prevents us from getting a good stretch in the upper back.

Solution: Keep your head in line with the spine while moving in/out of the forward bend; once in the pose, put your head down.

3. Excessive rotation of the pelvis might seem like a great accomplishment, but unfortunately here the practitioner often ends up “collapsing” into the hip joints and forgoes the benefits of the forward bend completely. When we consistently tip the pelvis too far forward, overtime we lose stability in the hip joints and make them prone to injury.

Solution: Bend the knees – this will prevent the pelvis from rotating forward. The forward bend will not be as deep, but you will get a stretch in the lower back.

So there you have it. Forward bends can be very useful for the lower back, as long as we control the relationship between the pelvis and the spine when we attempt them. Using progressive abdominal contraction protects the spine, supports the lower back and strengthens the core. And many things that we’ve come to admire about fancy forward bends, like straight legs and deep folds, often do more harm than good by destabilizing the joints and overstretching the ligaments. So let’s forget the extreme versions of the poses and instead focus on building stability and balanced relationships in the body.